En
107
⬛
Decoder Mode
Sets the format of digital audio playback to “DTS”.
For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to
“DTS”.
Input sources
HDMI 1-7, VIDEO AUX, AV 1-2, AUDIO 1-3
Settings
⬛
Volume Interlock
Enables/disables volume controls from iTunes/iPhone via AirPlay.
Input sources
AirPlay
Settings
⬛
DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback.
Input source
SERVER
Settings
X
A Digital Media Controller (DMC) is a device that can control other network devices through the network. When
this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on
the same network.
Configuring the SCENE function (Scene menu)
You can change the settings of the SCENE function (p.60) using the TV screen.
1
Press ON SCREEN.
2
Use the cursor keys to select “Scene” and press ENTER.
3
Use the cursor keys (
e
/
r
) to select a scene to be configured and press the
cursor key (
q
).
X
You can still switch the scene by using cursor keys (
e
/
r
) after Step 3.
Auto
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
Off
Disables volume controls from iTunes/iPhone.
Limited
Enables volume controls from iTunes/iPhone within the limited range
(-80 dB to -20 dB and mute).
Full
Enables volume controls from iTunes/iPhone in the full range
(-80 dB to +16.5 dB and mute).
Disable
Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
