Yamaha AVANTAGE RX-A2A User Manual Download

Page: 24 / 391

PART NAMES AND FUNCTIONS

Unit body

Part names and functions of the front panel

The part names and functions of the front panel are as follows.

PHONES

SELECT/ENTER

SCENE

ZONE

PURE DIRECT

USB

YPAO

5V 1A

MENU (CONNECT)

RETURN

(power)

Turns on/off (standby) the Main zone (p.85).

Standby indicator

Lights up when the unit is in standby mode under any of the following conditions.

(

HDMI Control is enabled (p.204)

(

Standby Through is enabled (p.206)

(

Network Standby is enabled (p.277)

(

Bluetooth Standby is enabled (p.282)

VOLUME

Adjusts the volume.

Remote control sensor

Receives remote control signals (infrared) (p.14).

Front display

Displays information and menu (p.26).

NOTE

Under the high or low temperature, the visibility of the character is sometimes deteriorated by the LCD characteristics. It is not
a malfunction.

PART NAMES AND FUNCTIONS > Unit body

Summary of Contents for AVANTAGE RX-A2A








































































































































































































































































































































































































Search results

Summary of Contents for AVANTAGE RX-A2A

Reviews:

Related manuals for AVANTAGE RX-A2A

Brands by name

Popular brands

Yamaha AVANTAGE RX-A2A, User Manual

Search results

Summary of Contents for AVANTAGE RX-A2A

Reviews:

Related manuals for AVANTAGE RX-A2A

Brands by name

Popular brands