Before using the sound bar, make sure you have received all of the following items.
Install the sound bar on the TV stand, etc.
The sound bar can also be mounted on a wall, using the included
mounting template and commercially available screws. Refer to the
Owner’s Manual for additional installation instructions.
Supplied items
ATS-1070 Quick Start Guide
UA
EN
Sound bar (ATS-1070)
Remote control
A CR2025 Lithium battery
has already been inserted
into the remote control.
Optical digital audio cable
Power cable
Mounting template
Use when mounting the sound bar on a wall
Spacers × 2
Use when mounting the
sound bar on a wall
Owner’s Manual
Analog audio cable
(RCA plug (L/R)-3.5 mm
mini plug cable)
Quick Start Guide
(This sheet)
Preparing the remote control
Remove the battery’s insulating strip before
attempting to use the remote control.
Battery’s insulating strip
Installation
Touch panel
Remote control sensor
NOTICE
• Do not stack the sound bar and a BD player or other device directly on each other.
Doing so may cause a malfunction due to vibrations.
Published 04/2017 KS-A0
Manual Development Group
© 2017 Yamaha Corporation
AV16-0019
— 1 —
