Yamaha AS1000 - Amplifier, Owner'S Manual, Page: 9 / 212

9
En
8
INPUT selector
Selects the input source you want to listen to.
The audio signals of the selected input source are also
output at the REC jacks.
y
• The input source names correspond to the names of the
connection jacks on the rear panel.
• Switch to the MAIN DIRECT position to select the component
connected to the MAIN IN jacks. When MAIN DIRECT is
selected as the input source, no signals are output at the PRE
OUT, REC, and PHONES jacks.
• The input setting is retained for about 1 week after the power is
turned off.
The audio signals are not output at the REC jacks while LINE2 is
selected as the input source.
9
AUDIO MUTE
Press downward to reduce the current volume level by
approximately 20 dB. Press again to restore the audio
output to the previous volume level.
y
• The AUDIO MUTE indicator lights up while the mute function
is on.
• You can also rotate VOLUME on the front panel or press
VOL +/– on the remote control to resume the audio output.
0
VOLUME
Controls the volume level. This does not affect the REC
level.
The VOLUME control does not affect when you select MAIN
DIRECT as the input source. Adjust the volume level using the
volume control on the preamplifier connected to the MAIN IN
jacks.
BALANCE
VOLUME INPUT
TREBLE
MAIN DIRECT
LINE 2
LINE 1
CD
TUNER
PHONO
AUDIO MUTE
R L + -
0 9 8 7 6
Note Note
Eng
lish