YDP-C71 Owner’s Manual
Advanced Functions
23
E
NGLISH
5
If desired, record the other Part by repeating Steps 1–4.
NOTE
The recorded Song data can
be saved to computer as a
Standard MIDI file (SMF). For
instructions, refer to the
Computer-related Operations
manual.
6
To hear the recorded Song, Press [PLAY] to start playback.
Press [PLAY] again to stop playback.
Changing the Initial Settings of the
Recorded Song
The settings of the following parameters at the Song beginning can be changed
after the Record operation is completed.
- For individual Parts: Voice, Dual Voices, Reverb depth, Damper/Soft Pedal depth
- For the entire Song: Tempo, Reverb Type
1
Make the settings of the above parameters.
2
While holding down [REC], press the desired Part button to
engage Record Ready mode.
In this status, do not press [PLAY] again or any key. Otherwise, the originally
recorded performance data will be deleted.
3
Press [REC] again to exit from Record Ready mode.
Deleting Recorded Data
To delete the entire Song:
1
Press [REC] to engage Record Ready mode.
The [REC] and [+ R] lamps flash.
2
While holding down [PLAY], press [REC].
The [REC], [PLAY], [+ R] and [– L] lamps flash.
To exit from this status, press any other button such as [DEMO/SONG].
3
Press [REC], [PLAY], [+ R] or [– L] to delete the data of the entire Song.
After the operation is completed, all lamps turn off.
To delete a specific Part:
1
While holding down [REC], press [+ R] or [– L] for the Part you want to delete to
engage Record Ready mode.
The [REC] and the selected Part ([+ R] or [– L]) lamps flash.
2
Press [PLAY] to start recording without playing the keyboard.
The selected Part ([+ R] or [– L]) lamp flashes.
3
Press [REC] or [PLAY] to stop recording.
All data recorded for the selected Part will be deleted, and the lamp turns off.
Summary of Contents for Arius YDP-C71
Page 36: ...YCL XXX Owner s Manual ...
