Connecting to an iPad/iPhone
This explains what to do to power this unit, up through connecting to an iPad/iPhone.
What you need
(
Apple Lightning to USB 3 Camera Adapter and a commercially available USB-A to USB-C cable (for iPads
and iPhones with a Lightning connector)
(
Apple USB-C Digital AV Multiport Adapter and USB-C to USB-C charging cable (when using with a USB-C
port)
NOTE
(
When using this product for streaming or for long periods of time, have a power supply on hand to power your iPad/ iPhone.
(
For a list of compatible operating systems, see the following Yamaha website.
(
https://www.yamaha.com/2/ag08/
1
Make sure that the volume on this product and on the connected device is turned
all the way down.
2
Connect the included AC adapter to the [12V] DC jack on the rear panel, and slide
the [POWER SOURCE] selector switch to [12V] DC (left side).
Rear panel
AC adapter
(included)
3
Turn the [
z
] (standby/on) switch on.
4
After the LED light animation on the top panel of this unit finishes, check whether
the LED of the [
z
] (standby/on) switch on this product is lit.
5
Use a commercially available USB-A to USB-C cable to connect this product to an
Apple Lightning to USB 3 Camera Adapter.
USB cable
(commercially available)
Rear panel
30
Getting ready to use this product > Connecting to an iPad/iPhone
