3
AFC1
SPECIFICATIONS
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
GREEN-AND-YELLOW : EARTH
BLUE
: NEUTRAL
BROWN
: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be con-
nected to the terminal in the plug which is marked by the letter
E or by the safety earth symbol
or colored GREEN or
GREEN-and-YELLOW.
The wire which is coloured BLUE must be connected to the ter-
minal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.(3
wires)
WARNING
Components having special characteristics are marked and
must be replaced with parts having specification equal to those
originally installed.
• General
Sampling
frequency
Internal
48 kHz
External
39.69 to 50.88 kHz
Signal delay
0.21 ms (direct cable routed from Input
1 to output 1, fs = 48 kHz)
Memory
Configuration 2 (AA, SURROUND)
PATTERN
6 (for each configuration)
Indicators
7-segment LED x 2
Power source
120 V, 60 Hz
Power consumption
40 W
Max. dimensions (W x H x D) 480 x 141.5 x 373 mm
Weight
9.5 kg
Operating temperature
5 ˚C to 35 ˚C
Storing temperature
–20 ˚C to 60 ˚C
Power cord length
2.5 m
Accessories
Power cord, removal-proof fixing clamp
16-pin Euro-block connectors x 4
Owner’s Manual
Options
Digital audio cable CAS003
Digital audio cable CAS015
I/Os
Format
Level
Connector
specifications
WORD CLOCK
INPUT
—
TTL
BNC
WORD CLOCK
OUTPUT
—
TTL
BNC
MIDI IN
MIDI
—
DIN 5-pin
MIDI OUT
MIDI
—
DIN 5-pin
CASCADE IN
—
—
Half-pitch
50-pin
CASCADE OUT
—
—
Half-pitch
50-pin
PC CONTROL
—
RS232C/
RS422
9-pin D-sub
FOR SERVICE USE
—
RS422
9-pin D-sub
GPI IN (x16)
—
0 to 5 V
Euro-block
GPI OUT (x16)
—
0 to 5 V
Euro-block
GPI +V (x16)
—
6 mA max
Euro-block
SLOT (x4)
mini YGDAI
—
—
Card name
Format
Inputs
Outputs
MY8-AT
ADAT
8
8
MY8-TD
TASCAM
8
8
MY8-AE
AES/EBU
8
8
MY4-AD
Analog input
4
MY8-AD
Analog input
8
—
—
MY8-AD24
Analog input
8
—
• Control I/Os
•
SLOT 1 through 4
The following digital interface cards can be installed in Slots 1-4 on the rear panel.
Slot 1 is a serial interface.
Card name
Format
Inputs
Outputs
MY4-DA
Analog output
—
4
MY8-AD96
Analog input
8
—
MY8-DA96
Analog output
—
8
MY8-mLAN
mLAN
8
8
• The following cards are not supported for the AFC1:
MY8-AE96, MY8-AE96S, MY16-AT, MY16-TD, MY16-AE, Y56K
• MY8-mLAN is recognized as MY8-AE.
印の部品は、安全を維持するために重要な部品です。交換する
場合は、安全のために必ず指定の部品をご使用ください。