background image

  1.019K-441 

   

  Printed in Japan ’01.09

AEX-500NS

SERVICE MANUAL

EG

011590

ELECTRIC GUITAR

HAMAMATSU, JAPAN

 CONTENTS

OVERALL ASSEMBLY

............................................... 2

ELECTRICAL PARTS

............................................. 4

CIRCUIT BOARD

............................................ 5

CIRCUIT DIAGRAM

.................................................... 5

WIRING

....................................................................... 6

SPECIFICATIONS

.................................................... 6

This document is printed on chlorine free (ECF) paper with soy ink.

WARNING : CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!

If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.

20010910-60000

Summary of Contents for AEX500







Reviews: