AES920
4
FRONT
PICKUP
FRONT
VOLUME
REAR
PICKUP
REAR
VOLUME
OUTPUT
MASTER
TONE
PICKUP
SWITCH
(3 position Toggle)
GP20-12
15A
500K
Ω
15A
500K
Ω
05A
250K
Ω
0.022
µ
F
SPECIFICATIONS
WIRING
CIRCUIT DIAGRAM
STANDARD SPECIFICATIONS
Scale Length .............................. 628.0mm
Body-Neck Construction ......... Set Neck
Length ........................................ 995.8mm
Width ......................................... 343.6mm
Net Weight ................................ 4.1kg
COLOR
Body
HB/BL ..................................... Huney Burst/Black
CG/BL ..................................... Chacoal Gray/Black
Neck
MHB/BL ................................. Mahogany Brown/Black
BODY
Material ...................................... Maple + Mahogany
Body Depth ............................... 52mm
FINGERBOARD
Material ...................................... Rosewood
Fingerboard Width ................... 0-F 43.0mm, 12-F 52.5mm
No. of Frets ................................ 22
NECK
Material ...................................... Mahogany
Neck Thickness ........................ 1-F 21.9mm, 12-F 23.9mm
PARTS
Hardware ................................... Nickel Plated
Nut .............................................. Urea
Bridge ........................................ Die-Cast (Nickel)
Strings ........................................ D’Addario
CONTROLS
Volume ....................................... 15A 500K
Ω
x 2
Tone ........................................... 05A 250K
Ω
x 1
Pickup Switch ............................ 3 position Toggle Switch
PICKUPS
Front/Rear ................................ Humbucking
Magnet
Front/Rear .............................. Alnico V
PICKUP SWITCH
(3 position Toggle)
FRONT PICKUP
FRONT + REAR
REAR PICKUP
FRONT PICKUP
Shield Wire (BL)
Shield Wire (BL)
Shield Wire (BL)
REAR PICKUP
FRONT VOLUME
(15A 500K
Ω
)
Shield Wire (BL)
Shield Wire (BL)
Shield Wire (BL)
Shield Wire (BL)
BL
BL
Bare Wire
Bare Wire
REAR VOLUME
(15A 500K
Ω
)
to bridge ground
CONDENSER
(0.022
µ
F)
MASTER TONE
(05A 250K
Ω
)
OUTPUT JACK
(Open type)
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable) components may also
contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other
reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
