Yamaha A-S1100, Owner'S Manual, Page: 10 / 60

10
En
Controls and functions
■
Rear panel
1
PRE OUT jacks
y
• The PRE OUT jacks output the same channel signal as the
SPEAKERS L/R CH terminals.
• When you connect a stereo cable to the PRE OUT jacks to
drive the speakers using an external amplifier, it is not
necessary to use the SPEAKERS L/R CH terminals.
• The signal output at the PRE OUT jacks are affected by the
BASS and TREBLE control settings.
2
SPEAKERS L/R CH terminals
3
TUNER input jacks
4
PHONO input jacks
5
CD input jacks
6
MM/MC switch
Selects the type of cartridge of the turntable connected
to the PHONO jacks.
MM: Choose this setting if the connected turntable
uses an moving magnet (MM) cartridge.
MC: Choose this setting if the connected turntable
uses an moving coil (MC) cartridge.
y
When you replace the cartridge, be sure to turn off this unit.
7
GND (Ground) terminal
8
LINE 1 input jacks
9
LINE 2 jacks
PB (playback) input jacks and REC (recording) output
jacks are provided.
2 4 7 6 8 5 9 0
1
3
See page 16 for connection information.