Yamaha A-S1100, Owner'S Manual

Page: 12 / 60

12
En
Controls and functions
■
Remote control
1
Infrared signal transmitter
Outputs infrared control signals.
2
p
AMP key
Turns this unit ON or switches it to STANDBY mode.
For details on STANDBY mode, see “Front panel”
(page 6).
3
Input select keys
Selects the input source.
The audio signals of the selected input source are
output at the LINE 2 REC jacks.
y
When LINE 2 is selected as the input source, the audio
signals are not output at the LINE 2 REC jacks.
LINE: Selects the component connected to the
LINE 1 or LINE 2 jacks.
PHONO: Selects the turntable connected to the
PHONO jacks.
MAIN DIRECT: Selects the component connected to
the MAIN IN jacks. When MAIN DIRECT is
selected as the input source, the audio signals are
not output at the PRE OUT, LINE 2 REC and
PHONES jacks.
CD: Selects the CD player connected to the CD jacks.
TUNER: Selects the tuner connected to the TUNER
jacks.
4
Tuner control buttons
Control functions of Yamaha tuner. Refer to the
owner’s manual of your tuner for details.
Certain Yamaha tuners may not respond to some of these
control keys on the remote control.
4
2
1
3
6
7
AMP CD OPEN/CLOSE
LINE LINE
PRESET
1 2
PHONO MAIN DIRECT
CD TUNER
BAND
MUTE
SOURCE LAYER
VOLUME
5
Note