Yamaha 9000 Pro Owner'S Manual Download Page 113

Page: 113 / 250

Song Creator

Reference

113

■

Punch In Trigger

• First Key On ...... When FIRST KEY ON is selected, recording will begin when the first

key is played on the keyboard.

• Footswitch 1/2 ... When FOOT SW 1 or FOOT SW 2 is selected, recording will begin

when a footswitch connected to the corresponding rear-panel FOOT
SWITCH jack is pressed.

• Auto Set ............ When AUTO SET is selected, the punch-in and punch-out measures

are specified by the IN and OUT buttons (i.e., recording begins auto-
matically at the IN measure and ends at the OUT measure).

■

Part Selecting/Record Selecting

The default part for each track is displayed above the REC setting. The parts can be
changed as required by pressing the

[PART SEL.]

LCD button (the part names for

each track will be highlighted), selecting the desired parts via the corresponding but-
tons. When the parts have been changed, press the

[REC SEL.]

LCD button (the PART

SEL. LCD button will have changed to the

[REC SEL.]

LCD button) again to return to

the normal track setup display.

■

Delete

When the

[DEL.]

LCD button is pressed DELETE will appear for tracks which contain

data. Select DELETE via the corresponding LCD buttons while holding the

[DEL.]

button to delete all data in the corresponding tracks. The data is actually deleted when
the

[DEL.]

LCD button is released.

■

Song Save/Delete

• Save ................ This function saves the edited song to the disk.
• Delete ............. This function deletes the specified song file from the disk.

Track Setting for Recording (Quick Recording)

The explanations here apply to step #5 on page 111.

■

Delete

When the

[DEL.]

LCD button is pressed DELETE will appear for tracks which contain

data. Select “DELETE” via the corresponding LCD buttons while holding the

[DEL.]

button to delete all data in the corresponding tracks. The data is actually deleted when
the

[DEL.]

LCD button is released.

Set the desired track to “REC.”

Change the measure at which recording starts.

Play track

Muted track

No data

Record track

See page 125.

111

Summary of Contents for 9000 Pro



























































































































































































































































Search results

Summary of Contents for 9000 Pro

Reviews:

Related manuals for 9000 Pro

Brands by name

Popular brands

Yamaha 9000 Pro, Owner'S Manual

Search results

Summary of Contents for 9000 Pro

Reviews:

Related manuals for 9000 Pro

Brands by name

Popular brands