Basic information
51
R
Reverse
position
F
Forward
position
N
Neutral
position
Push
Turned on
Turn off
N
Neutral
position
*1: NMEA 2000 compatible chart plotter
*2: When using the DRIFTPOINT TRACK
Route settings
SetPoint function
SetPoint function
DRIFTPOINT
DRIFTPOINT TRACK
Way point 1
Way point 3
Way point 2
Enabling the various switches allows you to do the following operations.
DRIFTPOINT
Keeps only the boat’s heading, while the boat can drift with the wind and current.
DRIFTPOINT TRACK
Allows boat to drift along a set route while keeping a heading by using both the route setting function and the DRIFTPOINT function on
the multifunction display.
• While the SetPoint function is enabled, the engines are operated automatically, as needed, to maintain the boats position or heading. Do not enable this
function when people are in the water, or if other boats or obstacles are nearby. There is a risk of collision with the propeller or boat, which are moving for
adjustments. In addition, the operator should be prepared to steer at any time, in case the SetPoint function is released unexpectedly.
• There is a risk of serious injury or death if anyone in the water comes in contact with the rotating propeller or the moving boat. While the SetPoint function is
operating, the propeller rotates and the boat moves to maintain a fixed position. If anyone enters the water near the boat, immediately stop the engines and
disable the SetPoint function.
HOW TO START
2
3
4
1
N
N
*1
*2
OR
HOW TO RELEASE
F
R
Wind
Boat direction
Way point movement
DRIFTPOINT
DRIFTPOINT (DRIFTPOINT/DRIFTPOINT TRACK)
DRIFTPOINT
DEC_OM(QUINT)_EN.book 51 ページ ２０２１年６月２５日 金曜日 午前９時１６分
Downloaded from