manualshive.com logo in svg

Yamaha 640, Owner'S Manual

The Yamaha 640 Owner's Manual is a comprehensive guide providing detailed instructions and information on operating the Yamaha 640. Accessible for free download from manualshive.com, this manual ensures users have all the necessary knowledge and support to maximize their experience with the Yamaha 640.

Share
Download
background image

54

Digital Effects

RETURN

SEND

(Depth)

Speaker

Amplifier

System Effect

Insertion Effect

Mixer

52

System Effects and Insertion Effects

The reverb, chorus and DSP effects are divided into two different types or methods or
operation.
There are two types of digital effects: system effects and insertion effects.

●

 System Effects

Applies the effect to all of the parts input to the mixer. You can set the amount of effect
applied with the depth and return level parameters. Reverb and chorus are both system
effects.

●

 Insertion Effects

Applies the effect to only one designated part before inputting the signal to the mixer. You
can effectively use the digital effects by applying the desired effect to the specific part.
With the insertion effects, only the DSP depth can be set.

The illustration below with the various audio components (instruments, effect devices,
and a mixer) represents the inner workings of the DSP effects of the PSR-740/640.

●

 Reverb

All types function as system effects.

●

 Chorus

All types function as system effects.

●

 DSP (PSR-640)

Depending on the selected type, this functions either
as a system effect or an insertion effect.

●

 DSP1-3 (PSR-740)

All types function as insertion effects

Refer to “About Digital Effects” (page 152) and
the Type List.

Multi Effects (DSP1-3) 

(PSR-740)

The PSR-740 has a multi effect system featuring three separate DSP effect blocks.  These three blocks can be
connected in any one of six different ways, providing an exceptionally flexible and powerful system for enhancing
the sound of the voices.

Applying the DSP effect

Press any of the [DSP1] - [DSP3] buttons.

Depending on the effect setting (below), the
selected DSP multi effect is applied to one of
the keyboard-played voices (R1, R2, L).

• When the Voice Set function

is ON (page 136), the Multi
Effect (DSP1-3, FAST/
SLOW) on/off status will be
set automatically according
to the selected R1 panel
voice.

• Some of the song files may

contain Multi Effect settings.
When you play back such
songs, DSP and FAST/
SLOW  buttons on the panel
will automatically be turned
off.

Multi Effect Setting

1

Press the [MULTI EFFECT] button.

Summary of Contents for 640





























































































































































































Reviews:

No comments

Related manuals for 640

Vaporesso Revenger X Quick Manual preview
Revenger X
Brand: Vaporesso Pages: 10
Memorex MX2700 Series User Manual preview
MX2700 Series
Brand: Memorex Pages: 5
Technics SX-KN7000EB Service Manual preview
SX-KN7000EB
Brand: Technics Pages: 160
HP USB Smartcard CCID Keyboard User Manual preview
USB Smartcard CCID Keyboard
Brand: HP Pages: 11
HP TPC-L001K Product Manual preview
TPC-L001K
Brand: HP Pages: 2
HP XB387AA Specifications preview
XB387AA
Brand: HP Pages: 1
HP USB PS2 Washable User Manual preview
USB PS2 Washable
Brand: HP Pages: 20
HP XB387AA Quick Start Manual preview
XB387AA
Brand: HP Pages: 1
DOBE TP5-0556 User Manual preview
TP5-0556
Brand: DOBE Pages: 7
Gigabyte GK-K8000 User Manual preview
GK-K8000
Brand: Gigabyte Pages: 28
Gigabyte Aivia K8100 User Manual preview
Aivia K8100
Brand: Gigabyte Pages: 121
Blu Premium Operator'S Manual preview
Premium
Brand: Blu Pages: 18
VooPoo VFL Manual Instruction preview
VFL
Brand: VooPoo Pages: 10
ikbc typemaster X400 User Manual preview
typemaster X400
Brand: ikbc Pages: 5
Trust Keyboard User Manual preview
Keyboard
Brand: Trust Pages: 1
Trust CADA GXT 890 User Manual preview
CADA GXT 890
Brand: Trust Pages: 24
perixx PERIBOARD-410 User Manual preview
PERIBOARD-410
Brand: perixx Pages: 11
Genesis Thor 150 Quick Installation Manual preview
Thor 150
Brand: Genesis Pages: 2

Brands by name

Popular brands

Load more brands