manualshive.com logo in svg

Yamaha 640, Owner'S Manual

The Yamaha 640 Owner's Manual is a comprehensive guide providing detailed instructions and information on operating the Yamaha 640. Accessible for free download from manualshive.com, this manual ensures users have all the necessary knowledge and support to maximize their experience with the Yamaha 640.

Share
Download
background image

160

Alert Message List

The file is a purposely “copy-protected” disk.
The Copy function is not possible.

The disk contains no file to be loaded, copied, or be deleted.
Insert the disk that contains files to be loaded, copied, or deleted.

An unformatted disk is inserted.

An error occurred during execution of a disk operation.
Try changing the disk.
This message also may appear when executing the Load operation if the
internal memory becomes full.

The floppy disk’s write-protect tab is set to ON.
Remove the disk, set write-protect to off, reinsert the disk and attempt the
operation again.

There is no floppy disk inserted into the disk drive.
Insert a disk.

An error occured because the disk was removed during a disk operation.
Never remove a disk during a disk operation since this could damage both
the disk and the drive.

The disk’s memory capacity is full and no additional data can be recorded.
Delete one or more unneeded songs (using Delete), and attempt the
operation again.

When using the Copy operation, the inserted disk is different from the
source or destination disk.
Remove the disk and reinsert the proper Disk.

More than one file has the same name on the disk.
Change the name.

Maximum of 60 songs can be recorded.
Delete one or more unneeded songs (using Delete), and attempt the song
recording again.

If the internal memory becomes full during Style/Pad recording, this
message will appear on the display and recording will stop.

158

This message appears when executing the Quantize or Recording opera-
tions (in the Style Recording mode) when the internal memory is full.

No file on disk!
Insert another disk.

Unformatted disk!

Disk error!

Disk write-protected!

Disk file protected!
Can’t copy or record
this file.

No disk!
Insert a disk.

Disk removed!

Disk full!
Cannot continue.

Wrong disk!
Reinsert
the proper disk.

Same name on disk!
Change the file name.

Cannot record!
Maximum of 60 songs
can be recorded.

Memory full!
Cannot continue.

Memory full!
Clear unnecessary data.

Summary of Contents for 640





























































































































































































Reviews:

No comments

Related manuals for 640

BH FITNESS G6496FB Instructions For Assembly And Use preview
G6496FB
Brand: BH FITNESS Pages: 68
Niko 10-901 Manual preview
10-901
Brand: Niko Pages: 24
Zagg Slim Book Pro Instructions Manual preview
Slim Book Pro
Brand: Zagg Pages: 24
NavInc CP-PEU-GV3 Manual preview
CP-PEU-GV3
Brand: NavInc Pages: 6
Samsung SDS S-PATCH3-Cardio User Manual preview
S-PATCH3-Cardio
Brand: Samsung SDS Pages: 28
MSI S11-04DE216-PA3 Manual preview
S11-04DE216-PA3
Brand: MSI Pages: 35
VooPoo Uforce T2 Manual Instruction preview
Uforce T2
Brand: VooPoo Pages: 8
Chinavision CVPT-A163 User Manual preview
CVPT-A163
Brand: Chinavision Pages: 5
Yamaha Electone BK-4B Manual preview
Electone BK-4B
Brand: Yamaha Pages: 17
Yamaha Electone BK-20C Series Manual preview
Electone BK-20C Series
Brand: Yamaha Pages: 20
Yamaha Electone HX-1 User Manual preview
Electone HX-1
Brand: Yamaha Pages: 31
Yamaha Electone C-405 (French) Mode D'Emploi preview
Electone C-405
Brand: Yamaha Pages: 30
Yamaha Electone BK-20A Manual preview
Electone BK-20A
Brand: Yamaha Pages: 28
Yamaha Electone D-3 Playing Manual preview
Electone D-3
Brand: Yamaha Pages: 31
Yamaha Electone FS-50 User Manual preview
Electone FS-50
Brand: Yamaha Pages: 38
Yamaha Electone D-7 Playing Manual preview
Electone D-7
Brand: Yamaha Pages: 36
Yamaha Electone HS-8 Service Manual preview
Electone HS-8
Brand: Yamaha Pages: 43
Yamaha Electone HS-8 User Manual preview
Electone HS-8
Brand: Yamaha Pages: 86

Brands by name

Popular brands

Load more brands