118
Naming User Styles
1
-
7
Use the same operation as in “Quantize” (page 116).
8
Select “Name.”
Use the data dial, the [+/YES] button or the [-/NO] button.
9
Press the [NEXT] button to display the NAME screen.
10
Enter the desired name for the style.
Use the keyboard to enter the name (page 21).
Up to sixteen letters or characters can be used.
11
Press the [RECORD] button to exit from the Record mode.
For information on leaving the recording mode, see page 114.
Clearing User Style Data
1
-
7
Use the same operation as in “Quantize” (page 116).
9
Press the [NEXT] button to display the SECTION selection
screen.
10
Select a Section to be cleared.
Use the data dial, the [+/YES] button or the [-/NO] button.
When “All Sect” is selected as the section to be cleared, all style data (which
includes all sections and all tracks) will be deleted. In this case, go to step #13,
skipping over steps #11 and #12.
11
Press the [NEXT] button to display the TRACK selection
screen.
12
Select a Track to be cleared.
Use the data dial, the [+/YES] button or the [-/NO] button.
Style Recording
116
8
Select “Clear.”
Use the data dial, the [+/YES]
button or the [-/NO] button.
Summary of Contents for 640
Page 1: ......
