31
Advanced Functions
Playing back Songs
Some MIDI Songs such as Preset Songs are divided into the right hand and left hand parts. By using such
Song data, you can practice the left hand by turning on only the right hand part, and practice the right hand
by turning on only the left hand part — allowing you to practice parts separately for easy mastery of difficult
material.
1.
Select a Song to be practiced.
For information on selecting a Song, see page 27.
2.
Press the [RIGHT] or [LEFT] button to turn off the
corresponding part.
Both the [RIGHT] and [LEFT] lamps light when the Song is selected. Turn off the
desired part (you want to practice). Pressing each button will switch playback status
between on and off.
3.
Press the [PLAY/PAUSE] button to start playback.
Play and practice the part you just turned off while listening to the playback part as
a guide.
4.
Stop playback.
Press the [STOP] button to stop playback. Even if you don’t press the [STOP]
button, the Song stops automatically when Song playback reaches the end.
Playing a one-hand part — Part Cancel function (MIDI Songs)
4 3
2
NOTE
The parts can be turned on or
off even during playback.
NOTE
Usually, Channel 1 is assigned
to the [RIGHT] button, Channel
2 is assigned to the [LEFT]
button, and Channels 3 – 16
are assigned to the [EXTRA
PARTS] button. However, the
assignments may differ
depending on the particular
Song. Try pressing other
buttons, when the target part's
on and off does not change,
even when you press the
proper button.
NOTE
Whenever you select another
MIDI Song, both parts are
automatically turned on.
