manualshive.com logo in svg

Yamaha 407, Owner'S Manual

The Yamaha 407 Owner's Manual is an essential guide to fully understand and operate your Yamaha 407 product. Easily downloadable for free from our website, this comprehensive manual provides step-by-step instructions and valuable information to enhance your experience with the Yamaha 407.

Share
Download
background image

Quic

k Guide

CVP-409/407 Owner’s Manual

54

Singing Along with Song Playback (Karaoke) or 
Your Own Performance

Connect a microphone to the instrument and sing along with Song playback (Karaoke) or your own perfor-
mance.
The lyrics can be displayed when the Song contains lyric data. Sing with the microphone as you read the lyr-
ics shown in the display. Lyrics can also be displayed with the music score, letting you play and sing while fol-
lowing along with the notation and lyrics.

Connecting a Microphone

n

Always set the INPUT VOLUME to minimum when nothing is con-
nected to the [MIC/LINE IN] jack. Since the [MIC/LINE IN] jack is 
highly sensitive, it may pick up and produce noise when nothing is 
connected.

Adjust the controls while checking the SIGNAL and OVER lamps. The SIGNAL 
lamp lights to indicate that an audio signal is being received. Make sure to 
adjust the INPUT VOLUME so that this lamp is light. The OVER lamp lights 
when the input level is too high. Make sure to adjust the INPUT VOLUME so 
that this lamp does not light.

Disconnecting the microphone

1

Set the [INPUT VOLUME] knob on the bottom panel of the instrument to the minimum position.

2

Disconnect the microphone from the [MIC./LINE IN] jack.

n

Set the [INPUT VOLUME] knob to the minimum position before turning off the power.

1

Make sure you have a conventional dynamic microphone.

2

Set the [INPUT VOLUME] knob on the bottom panel of the instrument to the minimum 
position.

3

Connect the microphone to the [MIC./LINE IN] jack.

MIN

MAX

INPUT

MIC.

MIC. LINE

PHONES

VOLUME

LINE IN

2, 5

4

3

4

Set the [MIC. LINE] switch to “MIC.”

5

(For microphones having a power source, turn on the power first.) Adjust the [INPUT 
VOLUME] knob while singing into the microphone.

Summary of Contents for 407









































































































































































































































Reviews:

No comments

Related manuals for 407

X-Rite 891 Operation Manual preview
891
Brand: X-Rite Pages: 80
Danfoss 40 Calibration Instruction preview
40
Brand: Danfoss Pages: 8
Valeport 106 Operating Manual preview
106
Brand: Valeport Pages: 27
Keithley 199 Quick Reference Manual preview
199
Brand: Keithley Pages: 49
Accu-Chek Inform II Training Manual preview
Inform II
Brand: Accu-Chek Pages: 12
Badger Meter Blancett B3100 Series User Manual preview
Blancett B3100 Series
Brand: Badger Meter Pages: 16
Badger Meter ModMAG M1000 User Manual preview
ModMAG M1000
Brand: Badger Meter Pages: 26
Badger Meter ModMAG M2000 Installation And Operation Manual preview
ModMAG M2000
Brand: Badger Meter Pages: 48
F&F LE-03 Quick Start Manual preview
LE-03
Brand: F&F Pages: 2
Keithley 236 Applications Manual preview
236
Brand: Keithley Pages: 201
Energic Plus MPD-1007E Manual preview
MPD-1007E
Brand: Energic Plus Pages: 12
Facom DX.V12A Instruction Manual preview
DX.V12A
Brand: Facom Pages: 48
IFM SDG 50 Series Operating Instructions Manual preview
SDG 50 Series
Brand: IFM Pages: 38
Fishman Acoustic Performer Pro Manual preview
Acoustic Performer Pro
Brand: Fishman Pages: 24
Hanna Instruments HI 95724C Instruction Manual preview
HI 95724C
Brand: Hanna Instruments Pages: 12
AKCP ILPM Manual preview
ILPM
Brand: AKCP Pages: 16
Swann AMI Codes-II Operator'S Manual preview
AMI Codes-II
Brand: Swann Pages: 106
CAME BlueForce Smart Instructions For Use Manual preview
BlueForce Smart
Brand: CAME Pages: 24

Brands by name

Popular brands

Load more brands