Trouble Recovery
47
4.
Prepare the engine for starting. For fur-
ther information, see page 24.
5.
Insert the knotted end of the rope into the
notch in the flywheel rotor and wind the
rope several turns around the flywheel
one or two turns clockwise.
6.
Give a strong pull straight out to crank
the engine. Repeat if necessary.
EMU33502
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately.
NOTICE:
Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
[ECM00402]
1. Manual starter/flywheel magnet cover
2. Bolt
2
1
2
2
ZMU02627
ZMU02628
U6GD22E0.book Page 47 Friday, January 13, 2023 10:22 AM
