Pre-operation checks
102
1
“Blower” button
To check the operation using the switch pan-
el:
Push the “BLOWER” switch. Check that the
blowers operate when the switch light is on
and that the blowers stop when the switch
light is off.
1
“BLOWER” switch
Navigation and anchor lights checks
Make sure that the bow light and anchor light
operate properly. (See page 80.)
TIP:
Before operating the boat in daylight hours
after checking the navigation and anchor
lights, store the anchor light.
1
Bow light
2
Anchor light
To check the operation using the multi-func-
tion display:
(1) Tap the “Navigation” light button on the
system control screen. Check that the
bow light and anchor light come on when
the button is blue and that both lights go
off when the button is gray.
(2) Tap the “Anchor” light button on the sys-
tem control screen. Check that only the
anchor light comes on when the button is
blue and that the anchor light goes off
when the button is gray.
1
“Navigation” light button
2
“Anchor” light button
TIP:
You can also tap the navigation light indicator
and the anchor light indicator on the status
Bilge
Blower
FUEL
%
100
x1000 rpm
9
19
START
V
13.0
SE
1
1
1
2
Anchor
Nav
RUNNING MODE
DEPTH
ft
.8
9
x1000 rpm
9
19
HOUSE
V
13.0
SW
1
2
SportsBoat_F5K10.book Page 102 Tuesday, September 8, 2020 11:29 AM
Downloaded from
