manualshive.com logo in svg

Yamaha 212SS 2016, Owner'S/Operator'S Manual

Share
Download
Yamaha 212SS 2016 Owner'S/Operator'S Manual Download Page 137

Maintenance

131

Checking the shift gate mechanisms

WARNING

Do not touch the shift gates while the re-
mote control levers are being operated,
otherwise you could be pinched.

Check the shift gates for proper operation.
(1) Remove the engine shut-off cord (lan-

yard) and main switch keys.

(2) Put the remote control levers in the neu-

tral position.

(3) Check that the shift gates are slightly

above the shift gate neutral position when
the remote control levers are in the for-
ward position, and that the shift gates are
in the fully open position when the remote
control levers are moved farther forward.

1

Shift gate

2

Fully open position

(4) Check that the shift gates are in the fully

closed position when the remote control
levers are in the reverse position.

1

Shift gate

2

Fully closed position

If the shift gates do not operate correctly, ask
your authorized Yamaha Boat Dealer for ser-
vice.

2

2

1

1

2

2

1

1

SportsBoat_F2J15.book  Page 131  Monday, May 18, 2015  6:25 PM

Summary of Contents for 212SS 2016

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands