Yamaha 2016 Grizzly yf700gg, Service Manual

Page: 205 / 474

ENGINE REMOVAL (1)
5-4
EBS30127
INSTALLING THE EXHAUST PIPE AND
MUFFLER
1. Install:
• Gasket “1”
• Exhaust pipe “2”
• Exhaust pipe nuts “3”
2. Install:
• Muffler bracket “4”
• Muffler bracket bolts “5”
3. Install:
• Gasket “6”
• Muffler “7”
• Washer “8”
• Muffler bolt “9”
TIP
Do not fully tighten the muffler bolt.
4. Install:
• Springs “10”
TIP
Install the springs so that the spring ends are
pointing inward as shown in the illustration.
5. Tighten:
• Muffler bolt “9”
EBS30554
INSTALLING THE V-BELT COOLING DUCTS
1. Install:
• V-belt cooling intake duct joint “1”
• V-belt cooling intake duct “2”
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Position the V-belt cooling intake duct joint
with its arrow mark “a” pointing toward the en-
gine.
b. Align the projection on the V-belt cooling in-
take duct joint with the rib on the crankcase in
the area “b” shown in the illustration.
c. Align the screw head with the seam on the V-
belt cooling intake duct joint in the area “c”
shown in the illustration.
d. Align the projection on the V-belt cooling in-
take duct with the projection on the V-belt
cooling intake duct joint in the area “d” shown
in the illustration.
e. Align the bend in the screw clamp with the
projection on the V-belt cooling intake duct
joint in the area “e” shown in the illustration.
T
R
.
.
Exhaust pipe nut
20 Nm (2.0 m·kgf, 14 ft·lbf)
T
R
.
.
Muffler bracket bolt
20 Nm (2.0 m·kgf, 14 ft·lbf)
T
R
.
.
Muffler bolt
33 Nm (3.3 m·kgf, 24 ft·lbf)
New
New
10
10
10
1
10
4
5 9
8
5
6
7
2
3
New
New