Yamaha 2012 WaveRunner VX Sport, Owner'S/Operator'S Manual

Page: 40 / 96

Instrument operation
35
TIP:
“mph” is selected as the display unit at the
Yamaha factory.
To switch the speedometer display units:
Push the select button for at least 1 second,
within 10 seconds after the multifunction infor-
mation center is activated. The speedometer
display changes.
EJU31463
Tachometer
The tachometer shows the engine speed.
The outer numbers
×
1000 r/min and display
segments on the meter show the engine
speed.
EJU31555
Hour meter/voltmeter
The hour meter/voltmeter has both an hour
meter function and a voltmeter function. By
switching the meter, it can be used as either
an hour meter or a voltmeter.
TIP:
The hour meter is selected at the Yamaha
factory.
Hour meter
The hour meter shows the total number of
hours that the engine has been running since
the watercraft was new.
TIP:
The elapsed time will be kept even if the bat-
tery terminals have been disconnected.
1 Speedometer
1 Speedometer
2 Select button
1
1
2
1 Tachometer
1 Hour meter/voltmeter
1
1
UF2N51E0.book Page 35 Thursday, June 16, 2011 2:37 PM