INSTRUMENT AND CONTROL FUNCTIONS
4-14
4
2. Install the passenger seat holder
and bolts.
3. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
EAU14201
Seats (XVS1100AA)
Passenger seat
To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.
To install the passenger seat
1. Insert the projection on the front of
the passenger seat into the holder
as shown and place the seat in the
original position.
2. Install the washer and nut, and
then tighten the nut to the specified
torque.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolt, and then pull the
rider seat up.
1. Nut
2. Washer
Tightening torque:
Passenger seat nut:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
1. Projection
2. Seat holder
U3B825E0.book Page 14 Monday, June 28, 2010 2:48 PM
