Yamaha 2011 WR250X Owner'S Manual Download

Page: 82 / 102

PERIODIC MAINTENANCE AND ADJUSTMENT

7-36

EAU24313

Replacing the license plate
light bulb

1. Remove the license plate light unit

by removing the screws.

2. Remove the license plate light bulb

socket (together with the bulb) by
pulling it out.

3. Remove the burnt-out bulb by pull-

ing it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with the

bulb) by pushing it in.

6. Install the license plate light unit by

installing the screws.

EAU45222

Replacing an auxiliary light
bulb

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit. (See

page 7-33.)

2. Remove the auxiliary light socket

(together with the bulb) by pulling it
out.

3. Remove the burnt-out bulb by pull-

ing it out.

4. Insert a new bulb into the socket.
5. Install the auxiliary light socket (to-

gether with the bulb) by pushing it
in.

6. Install the headlight unit.

1. Screw

1. License plate light unit
2. License plate light bulb socket

1. Auxiliary light bulb socket

U32D25E0.book Page 36 Wednesday, January 20, 2010 10:59 AM

Summary of Contents for 2011 WR250X







































































































Search results

Summary of Contents for 2011 WR250X

Reviews:

Related manuals for 2011 WR250X

Brands by name

Popular brands

Yamaha 2011 WR250X, Owner'S Manual

Search results

Summary of Contents for 2011 WR250X

Reviews:

Related manuals for 2011 WR250X

Brands by name

Popular brands