Yamaha 2011 WR250FA, Owner'S Service Manual

Page: 29 / 316

1-15
MULTI-FUNCTION DISPLAY
MULTI-FUNCTION DISPLAY
Be sure to stop the machine before making
any setting changes to the multi-function
display.
The multi-function display is equipped with the
following:
BASIC MODE:
• Speedometer (which shows current speed)
• Clock
• Two tripmeters (which shows the distance
that has been traveled since it was last set to
zero)
• Tire diameter (which shows the difference
from initial setting in percentage)
RACE MODE:
• Timer (which shows the time that has been
accumulated since the start of timer measure-
ment)
• Tripmeter (which shows the accumulated
travel distance in timer measurement)
• Average speed (which shows the average of
the speeds that have been made since the
start of timer measurement)
• Change tripmeter digits (capable of change to
any given ones)
• Tire diameter correction (which shows the tire
diametrical difference in percentage as the
tripmeter travel distance is corrected)
DESCRIPTION
Operation buttons:
1. Select button "SLCT 1"
2. Select button "SLCT 2"
3. Reset button "RST"
Screen display:
4. Tripmeter indicator
5. Tripmeter indicator
6. Timer indicator
7. Clock/Timer
8. Speedometer (Current speed/Average
speed)
9. Tripmeter
10. Average speed indicator
The operation buttons can be pushed in the fol-
lowing two manners:
Short push: Push the button. (
)
Long push: Push the button for 2 seconds or
more. (
)
BASIC MODE
Changing speedometer display
1. Push the "SLCT2" button for 2 seconds or
more to change the speedometer units. The
speedometer display will change in the fol-
lowing order:
MPH
→
km/h
→
MPH.
Setting the time
1. Push the "SLCT1" button for 2 seconds or
more to enter the time setting mode.
2. Push the "RST" button to change the display
for time indication. The display will change in
the following order:
Hour
→
Minute
→
Second
→
Hour.
The digits capable of setting go on flashing.