Pre-operation checks
64
gate moves up and down according to the op-
eration of the shift lever and that the gate
makes contact with the stoppers. (See page
35 for reverse system operation.)
EJU41431
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.
Face the handlebars straight ahead with the
handlebars in the lowest position and the
throttle lever in the fully closed (idle) position,
and then make sure that there is the proper
amount of throttle lever free play when the
throttle lever is in the fully closed (idle) posi-
tion. (See page 33 for telescopic steering sys-
tem operation procedures.)
EJU40112
Remote control transmitter check
Make sure that the remote control transmitter
operates properly. (See page 30 for Yamaha
Security System setting procedures and page
37 for Low RPM Mode activation procedures.)
1
Stopper
1
1
Lowest position with handlebars facing
straight ahead
1
Throttle lever free play
Throttle lever free play:
2.0–5.0 mm (0.08–0.20 in)
1
1
UF2R12E0.book Page 64 Tuesday, July 6, 2010 9:21 AM
