Control function operation
31
comes on. This indicates the unlock mode is
selected.
EJU31152
Engine stop switch “
”
The engine stop switch (red button) stops the
engine when the switch is pushed.
EJU31163
Engine shut-off switch “
”
The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls off
the watercraft.
Insert the clip under the engine shut-off switch
before starting the engine.
When the engine is not running, remove the
clip from the engine shut-off switch to prevent
accidental starting or unauthorized operation
by children or others.
EJU36286
Start switch “
”
NOTICE
ECJ01310
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
1
“L-Mode” (unlock) button
2
“UNLOCK” indicator light
1
Engine stop switch
L - M o d e
1
2
1
1
Engine shut-off switch
2
Clip
3
Engine shut-off cord (lanyard)
2
1
3
UF2R12E0.book Page 31 Tuesday, July 6, 2010 9:21 AM
