Yamaha 2011 V Star XVS650A Owner'S Manual Download

Page: 30 / 94

INSTRUMENT AND CONTROL FUNCTIONS

4-13

To install the rider seat

1. Insert the projection on the front of

the rider seat into the seat holder
as shown, and then place the seat
in the original position.

2. Install the passenger seat holder

by installing its bolts.

3. Install the passenger seat.

TIP

Make sure that the seats are properly
secured before riding.

EAU14192

Seats (XVS650AA)

Passenger seat

To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.

To install the passenger seat

1. Insert the projections on the front

of the passenger seat into the
holders as shown and place the
seat in the original position.

2. Install the washer and nut, and

then tighten the nut to the specified
torque.

1. Bolt
2. Passenger seat holder

1. Seat holder
2. Projection

1. Nut

2. Washer

U1BF21E0.book Page 13 Tuesday, April 20, 2010 11:41 AM

Summary of Contents for 2011 V Star XVS650A































































































Search results

Summary of Contents for 2011 V Star XVS650A

Reviews:

Related manuals for 2011 V Star XVS650A

Brands by name

Popular brands

Yamaha 2011 V Star XVS650A, Owner'S Manual

Search results

Summary of Contents for 2011 V Star XVS650A

Reviews:

Related manuals for 2011 V Star XVS650A

Brands by name

Popular brands