INSTRUMENT AND CONTROL FUNCTIONS
4-9
4
EAU14220
Rider seat
To remove the rider seat
Remove the bolts, and then pull the rid-
er seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown.
2. Place the rider seat in the original
position, and then tighten the bolts.
TIP
Make sure that the rider seat is properly
secured before riding.
EAU14282
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the key
as shown.
To lock the helmet holder, place it in the
original position, and then remove the
key.
WARNING! Never ride with a
helmet attached to the helmet hold-
er, since the helmet may hit objects,
causing loss of control and possibly
an accident.
[EWA10161]
1. Bolt
1. Projection
2. Seat holder
1. Helmet holder
2. Unlock.
U1BE21E0.book Page 9 Wednesday, May 12, 2010 2:16 PM
