Yamaha 2011 MT01A Page 85 Owner'S Manual Download | Manualshive

Page: 85 / 96

background image

MOTORCYCLE CARE AND STORAGE

8-3

8

●

Never use compounds or other
special treatments to clean the tita-
nium mufflers, as they will remove
the finish on the outer surface of
the mufflers.

●

Even the smallest amounts of oil,
such as from oily towels or finger-
prints, will leave stains on the tita-
nium mufflers, which can be
removed with a mild detergent.

●

Note that the thermally induced
discoloring of the portion of the ex-
haust pipe leading into the titanium
mufflers is normal and cannot be
removed.

After cleaning

1. Dry the motorcycle with a chamois

or an absorbing cloth.

2. Immediately dry the drive chain

and lubricate it to prevent it from
rusting.

3. Use a chrome polish to shine

chrome, aluminum and stainless-
steel parts.

4. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal,
including chrome- and nickel-plat-
ed, surfaces.

5. Use spray oil as a universal clean-

er to remove any remaining dirt.

6. Touch up minor paint damage

caused by stones, etc.

7. Wax all painted surfaces.
8. Let the motorcycle dry completely

before storing or covering it.

WARNING

EWA11131

Contaminants on the brakes or tires
can cause loss of control.

●

Make sure that there is no oil or
wax on the brakes or tires.

●

If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle’s
braking performance and cor-
nering behavior.

NOTICE

ECA10800

●

Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.

●

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

●

Avoid using abrasive polishing
compounds as they will wear
away the paint.

TIP

●

Consult a Yamaha dealer for ad-
vice on what products to use.

●

Washing, rainy weather or humid
climates can cause the headlight
lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from the
lens.

U5YU27E0.book Page 3 Wednesday, December 15, 2010 1:28 PM

«
...
83
84
85
86
87
...
»

Summary of Contents for 2011 MT01A

































































































Reviews:

No comments

Related manuals for 2011 MT01A

Brand: Cannondale Pages: 102

Brand: KAYO MOTOR Pages: 74

Brand: KAYO MOTO Pages: 5

Brand: Yamaha Pages: 32

Brand: Keis Pages: 2

Brand: DUCATI Performance Pages: 9

Brand: KTM Power Parts Pages: 7

Brand: hepco & becker Pages: 2

Brand: Pandora Pages: 56

Brand: Miller Pages: 22

Brand: yasuni Pages: 9

Brand: LAS Pages: 22

Brand: SCHUBERTH Pages: 43

Brand: Malaguti Pages: 383

Brand: hepco & becker Pages: 2

Brand: GAS GAS Pages: 52

TXT RACING 2015

Brand: GAS GAS Pages: 59

Brand: GAS GAS Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands