Yamaha 2010 XVS1100AZ, Owner'S Manual

Page: 26 / 96

INSTRUMENT AND CONTROL FUNCTIONS
4-7
4
EAU12348
Handlebar switches
Left
Right (XVS1100Z)
Right (XVS1100AZ)
EAU12350
Pass switch “ ”
Press this switch to flash the headlight.
EAU12400
Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
EAU12460
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “
”. To signal a left-hand
turn, push this switch to “ ”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12500
Horn switch “ ”
Press this switch to sound the horn.
EAU12660
Engine stop switch “ / ”
Set this switch to “ ” before starting
the engine. Set this switch to “ ” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12711
Start switch “ ”
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
EAU12733
Hazard switch “ ” (XVS1100AZ)
With the key in the “ON” or “ ” posi-
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
1. Pass switch “ ”
2. Dimmer switch “ / ”
3. Horn switch “ ”
4. Turn signal switch “ / ”
1. Engine stop switch “ / ”
2. Start switch “ ”
1. Engine stop switch “ / ”
2. Hazard switch “ ”
3. Start switch “ ”
U3B824E0.book Page 7 Thursday, June 18, 2009 8:34 AM