5-53
ENGINE REMOVAL
ENGINE REMOVAL
REMOVING THE ENGINE
Order
Part name
Q'ty
Remarks
Hold the machine by placing the suitable stand
under the frame.
Refer to "HANDLING NOTE".
Drain the engine oil.
Refer to "CHANGING THE ENGINE OIL"
section in the CHAPTER 3.
Seat and fuel tank
Refer to "REMOVING THE SEAT, FUEL
TANK AND SIDE COVERS" section in the
CHAPTER 3.
Radiator
Refer to "RADIATOR" section.
Exhaust pipe and silencer
Refer to "REMOVING THE EXHAUST PIPE
AND SILENCER" section in the CHAPTER 3.
Air cut-off valve assembly
Refer to "AIR INDUCTION SYSTEM" section.
Clutch cable and guide
Disconnect at the engine side.
Shift pedal
Refer to "AC MAGNETO AND STARTER
CLUTCH" section.
Rear shock absorber
Refer to "REAR SHOCK ABSORBER" sec-
tion in the CHAPTER 6.
Carburetor
Refer to "CARBURETOR" section.
Cylinder head breather hose
Refer to "CAMSHAFTS" section.
Oil hose and oil tank breather hose
Refer to "OIL PUMP" section.
Summary of Contents for 2010 WR450FZ
