Yamaha 2009 V Star XVS650AY Owner'S Manual Download Page 54 | Manualshive

Page: 54 / 92

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-12

7

6. Check the final gear case for oil

leakage. If oil is leaking, check for
the cause.

EAU33383

Cleaning the air filter element

The air filter element should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Clean or, if necessary, replace the air
filter element more frequently if you are
riding in unusually wet or dusty areas.

1. Remove the air filter case cover by

removing the bolts.

2. Pull the air filter element out.
3. Lightly tap the air filter element to

remove most of the dust and dirt,
and then blow the remaining dirt
out with compressed air as shown.
If the air filter element is damaged,
replace it.

4. Insert the air filter element into the

air filter case as shown.

NOTICE:

Make sure that the air filter ele-
ment is properly seated in the
air filter case. The engine
should never be operated with-
out the air filter element in-
stalled, otherwise the piston(s)
and/or cylinder(s) may become
excessively worn.

[ECA10481]

1. Air filter case cover

2. Bolt

1. Air filter element

U3B723E0.book Page 12 Monday, April 14, 2008 9:05 AM

«
...
52
53
54
55
56
...
»

Summary of Contents for 2009 V Star XVS650AY





























































































Reviews:

No comments

Related manuals for 2009 V Star XVS650AY

McPherson Strut MIR 1G00

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Yamaha Pages: 96

Brand: KEEWAY Pages: 164

Brand: R&G Pages: 21

Brand: Miller Pages: 12

Brand: Crivit Pages: 58

Brand: SHOEI Pages: 38

Brand: HERO Pages: 68

Brand: Yamaha Pages: 164

Brand: Yamaha Pages: 80

Brand: Yamaha Pages: 80

Brand: DYNATEK Pages: 4

Brand: DYNATEK Pages: 12

Brand: R&G Pages: 6

Brand: Chicago Electric Pages: 7

Brand: Chicago Electric Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands