Yamaha 2008 V-Star 1300 Owner'S Manual Download Page 41

Page: 41 / 90

OPERATION AND IMPORTANT RIDING POINTS

5-4

CAUTION:

ECA11281

After 1000 km (600 mi) of operation,
the engine oil must be changed, and
the oil filter cartridge or element re-
placed.

1600 km (1000 mi) and beyond

The vehicle can now be operated nor-
mally.

CAUTION:

ECA10270

If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.

EAU17212

Parking

When parking, stop the engine, and
then remove the key from the main
switch.

WARNING

EWA10310

●

Since the engine and exhaust
system can become very hot,
park in a place where pedestri-
ans or children are not likely to
touch them.

●

Do not park on a slope or on soft
ground, otherwise the vehicle
may overturn.

CAUTION:

ECA10380

Never park in an area where there
are fire hazards such as grass or
other flammable materials.

U12C21E0.book Page 4 Thursday, October 11, 2007 3:35 PM

Summary of Contents for 2008 V-Star 1300



























































































Search results

Summary of Contents for 2008 V-Star 1300

Reviews:

Related manuals for 2008 V-Star 1300

Brands by name

Popular brands

Yamaha 2008 V-Star 1300, Owner'S Manual

Search results

Summary of Contents for 2008 V-Star 1300

Reviews:

Related manuals for 2008 V-Star 1300

Brands by name

Popular brands