manualshive.com logo in svg

Yamaha 2006 YZFR6V, Owner'S Manual

Share
Download
Yamaha 2006 YZFR6V Owner'S Manual Download Page 32

INSTRUMENT AND CONTROL FUNCTIONS

3-16

3

EAU12941

Brake pedal 

The brake pedal is on the right side of
the motorcycle. To apply the rear
brake, press down on the brake pedal.

EAU13070

Fuel tank cap 

To open the fuel tank cap

Open the fuel tank cap lock cover, in-
sert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be re-
leased and the fuel tank cap can be
opened.

To close the fuel tank cap

1. Push the fuel tank cap into position

with the key inserted in the lock.

2. Turn the key counterclockwise to

the original position, remove it, and
then close the lock cover.

NOTE:

The fuel tank cap cannot be closed un-
less the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly closed and locked.

WARNING

EWA11090

Make sure that the fuel tank cap is
properly closed before riding.

1. Brake pedal

1. Fuel tank cap lock cover

2. Unlock.

U2C020E0.book  Page 16  Wednesday, November 2, 2005  10:09 AM

Summary of Contents for 2006 YZFR6V











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands