Yamaha 2006 V Star XVS650AV Owner'S Manual Download Page 61 | Manualshive

Page: 61 / 92

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-19

6

system. If there is air in the hy-
draulic system, have a Yamaha
dealer bleed the system before
operating the motorcycle. Air in
the hydraulic system will dimin-
ish the braking performance,
which may result in loss of con-
trol and an accident.

EAU22231

Adjusting the brake pedal
position and free play

XVS650

XVS650A

WARNING

EWA10670

It is advisable to have a Yamaha
dealer make these adjustments.

NOTE:

The brake pedal position should be ad-
justed before adjusting the brake pedal
free play.

Brake pedal position

The brake pedal should be positioned
approximately XVS650 102.0 mm
(4.02 in)
XVS650A 108.0 mm (4.25 in) above
the top of the footrest as shown. Peri-
odically check the brake pedal position
and, if necessary, adjust it as follows.

1. Loosen the locknut at the brake

pedal.

2. To raise the brake pedal, turn the

adjusting bolt in direction (a). To
lower the brake pedal, turn the ad-
justing bolt in direction (b).

1. Distance between brake pedal and footrest
2. Brake pedal free play

1. Distance between brake pedal and footrest

2. Brake pedal free play

U3B720E0.book Page 19 Friday, April 15, 2005 1:34 PM

«
...
59
60
61
62
63
...
»

Summary of Contents for 2006 V Star XVS650AV





























































































Reviews:

No comments

Related manuals for 2006 V Star XVS650AV

Brand: PACIFIC CYCLE Pages: 112

Brand: Tao Motor Pages: 3

Brand: yasuni Pages: 8

Easyrack 6622520 01 01

Brand: hepco & becker Pages: 4

Brand: Insportline Pages: 19

Brand: LAZER Pages: 11

V 7 CAFE CLASSIC

Brand: MOTO GUZZI Pages: 147

Brand: Memphis Shades Pages: 2

Brand: hepco & becker Pages: 5

Brand: N-Com Pages: 32

Brand: GAS GAS Pages: 144

Brand: Vetter Pages: 11

Brand: DAINESE Pages: 144

BOOMERANG 7554CB

Brand: Bagster Pages: 2

Brand: Vanucci Pages: 35

Brand: Petzl Pages: 10

Brand: SPEED & STRENGTH Pages: 7

Brand: Indian Motorcycle Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands