manualshive.com logo in svg

Yamaha 02R96 Version 2, Owner'S Manual

The Yamaha 02R96 Version 2 Owner's Manual is a comprehensive guide to unlock the full potential of this professional-grade audio mixing console. With its intuitive design and advanced features, this manual is a must-have tool for any audio enthusiast. Download your free copy from manualshive.com today!

Share
Download
background image

Panner

217

02R96 Version 2—Owner’s Manual

Trim Mode

Trim mode can be set as follows.

1

While holding down a channel’s [AUTO] button, press the USER DEFINED 
KEYS [7] (TRIM) button.

If channel Display mode [F3] or Meter Display mode [F4] is currently selected, the chan-
nel’s Automation mode is displayed while its [AUTO] button is pressed.

You can display the Automation mode settings of all channels by pressing and holding the 
USER DEFINED KEYS [DISPLAY] (AUTO STATUS) button.

Grouped channels are set together.

Arming Parameters for Automation

Parameters can be selected for automation recording as follows.

1

Use the following USER DEFINED KEYS 

to arm parameters.

The button indicators for armed parameters light up.

Panner

Selecting a Track

Use the SELECTED CHANNEL ROUTING buttons to manipulate the following track 
operations.

Stereo Track Link

You can control the panner for the L and R channels of stereo tracks simultaneously or indi-
vidually, depending on the stereo link status.

To cancel the stereo panner link, press and hold down the [Control] key on the keyboard 
and move the Joystick.

Pro Tools

Display

[AUTO] Button Indicators

Auto trim/write

TWrt

Flashing red/orange (Record Ready)
Orange (Recording)

Auto trim/touch

TTch

Auto trim/latch

TLch

Auto trim/read

TRd

Flashing green/orange

USER DEFINED KEYS

Pro Tools

[11] (FADER)

Volume

[12] (MUTE)

Mute

[13] (PAN)

Pan

[14] (SEND)

Send level

[15] (SEND MUTE)

Send mute

[16] (PLUG-IN)

Plug-in

To do this...

Use these buttons:

Selecting the previous track

ROUTING [1] button

Selecting the next track

ROUTING [2] button

Selecting the top track

ROUTING [3] + [1] buttons

Selecting the last track

ROUTING [3] + [2] buttons

Selecting the main output of the selected track

ROUTING [3] + [5] buttons

Selecting Send 5 of the selected track

ROUTING [3] + [7] buttons

Selecting the output/send of the selected track

ROUTING [5] + [7] buttons

Summary of Contents for 02R96 Version 2






























































































































































































































































































































































Reviews:

No comments

Related manuals for 02R96 Version 2

Waring WDM 360 Instructions Manual preview
WDM 360
Brand: Waring Pages: 20
Yamaha DME4IO-C User Manual preview
DME4IO-C
Brand: Yamaha Pages: 52
Yamaha DME24N Manual Del Instrucción preview
DME24N
Brand: Yamaha Pages: 80
Altrad Balde Descarga 300 Instruction Manual preview
Balde Descarga 300
Brand: Altrad Pages: 13
MBW MM120 Operator'S Safety And Service Manual preview
MM120
Brand: MBW Pages: 33
Gastrodomus GPLAN5M User Manual preview
GPLAN5M
Brand: Gastrodomus Pages: 37
Grohe Europlus E 36 021 Manual preview
Europlus E 36 021
Brand: Grohe Pages: 82
Peavey Architectural Acoustics MMA 800T User Manual preview
Architectural Acoustics MMA 800T
Brand: Peavey Pages: 12
InoTec 10039462 Original Operating Manual preview
10039462
Brand: InoTec Pages: 19
Power Dynamics PDV120S Instruction Manual preview
PDV120S
Brand: Power Dynamics Pages: 14
CombiSteel 7455.1410 User Manual preview
7455.1410
Brand: CombiSteel Pages: 10
Hyundai HM 638 Instruction Manual preview
HM 638
Brand: Hyundai Pages: 32
KitchenAid 7KSM60 Owner'S Manual preview
7KSM60
Brand: KitchenAid Pages: 40
Samson PL2404 Manual preview
PL2404
Brand: Samson Pages: 31
Myria MY4018 Instruction Manual preview
MY4018
Brand: Myria Pages: 15
Full Boar 0248909 Instruction Manual preview
0248909
Brand: Full Boar Pages: 14
Behringer EURORACK UB1002 User Manual preview
EURORACK UB1002
Brand: Behringer Pages: 10
Behringer Europower PMH660M User Manual preview
Europower PMH660M
Brand: Behringer Pages: 13

Brands by name

Popular brands

Load more brands