Rerecording Events
181
02R96 Version 2—Owner’s Manual
4
Use the cursor buttons to select YES, then press [ENTER].
The 02R96 enters Insert mode, and the INSERT button is highlighted.
The fader positions, mute function and other parameters are updated to the settings speci-
fied for the time value of the IN parameter.
5
Select the parameter you wish to insert using the AUTOMIX OVERWRITE but-
tons.
To select effect or plug-in parameters, locate the Effect Edit or Plug-in Edit page, then move
the cursor to the desired parameter and press [ENTER].
6
Select the insert destination channel by pressing the corresponding [AUTO]
button.
The selected [AUTO] button indicator lights up red.
7
Edit a parameter you wish to insert.
8
Use the cursor buttons to select the INSERT button, then press [ENTER].
A confirmation message appears.
9
Use the cursor buttons to select YES, then press [ENTER] to insert the data.
Once the data is inserted, Insert mode is cancelled and the INSERT button is unhighlighted.
Rerecording Events
Events can be rerecorded as many times as you like. Remember, however, that unlike the
first pass, on subsequent passes existing events for the currently punched in parameter are
overwritten, so use the OVERWRITE buttons and [AUTO] buttons with care. Instead of
using the [AUTO] buttons to punch in an entire channel, you can reduce the risk of over-
writing important data by punching in and out individual parameters (see page 183). Use
the Update To End option to determine how existing events are handled when rerecording
is stopped (see page 171). Use the Edit Out (see page 172) and Fader Edit (see page 173)
options to determine how Fader events are rerecorded.
