128
Chapter 11—Common Channel Functions
02R96 Version 2—Owner’s Manual
[SEL] buttons:
These buttons move the cursor on the Output Fader Group Master page.
[SOLO] buttons:
These buttons turn the Solo function of each Fader group on and off,
enabling you to monitor every channel in each Fader group.
Channel Faders:
The Channel Faders enable you to set the master level for each Fader
group.
Grouping Output Channel Mutes (ON/OFF)
The Bus Out, Aux Send, and Stereo Out mutes can be grouped, allowing you to mute several
Output Channels simultaneously. There are four Output Channel Mute groups: U, V, W,
and X.
1
Use the DISPLAY ACCESS [GROUP] button to locate the Output Mute Group
page.
2
Press the LAYER [MASTER] button.
3
Use the Up/Down cursor buttons to select Mute groups U–X.
The selected group is highlighted by a flashing cursor box.
4
Use the [SEL] buttons to add and remove Output Channels to and from the
selected group.
When an Output Channel is added to a Mute group, its [SEL] button indicator lights up.
ENABLE:
These buttons are used to enable and disable the groups.
OUTPUT MUTE MASTER:
When this check box is checked, pressing the MASTER
MUTE button turns mute on or off for all channels in the corresponding Mute group.
When this check box is unchecked, the Output Channel [ON] button status mutes or
unmutes the channels in the group.
MASTER MUTE:
When the Output Mute Master check box is checked, use this button to
mute or unmute all channels in the corresponding Mute group.
When the Output Mute Master check box is unchecked, pressing the Output Channel [ON]
button mutes or unmutes the channel in the corresponding Mute group (Mute On channels
are turned off and Mute Off channels are turned on).
