Yamaha 02R, Owner'S Manual, Page: 267 / 354

Digital I/O, Setup, and Utilities 157
Digital Recording Console 02R User’s Guide
Cascade Configuration
Just like the modular digital multitrack recorders it is intended to work
with, the 02R was designed to be easily expandable from a basic 16-track
(40 input) system up to a 64-track (160 input) system. It uses Cascade
Digital I/O card kits (CD8-CS) to accomplish this.
For installation details, see Section 13, “Installing Options” on page 171 of
the
User’s Guide , specifically “Digital Cascade Kit (CD8-CS)” on page 183.
Display Screen
Shown below is the third DIGITAL I/O display function – the Cascade
Configuration screen:
1. Press the [DIGITAL I/O]
button.
A DIGITAL I/O display
function appears.
You may have to press
the [DIGITAL I/O] button
repeatedly to get to the
“Cascade
Configuration” screen.
2. Use the CURSOR buttons
to specify which of the
internal auxiliary buses
the cascade AUX A and
AUX B buses will be
assigned to.
Press the [ENTER] button
to make the selection.
3. Select the “ID” option
with the CURSOR buttons
and rotate the encoder
wheel to specify the
cascade ID number.
4. Use the CURSOR buttons
to select the cascade
input attenuator icons.
Rotate the encoder
wheel to change the
attenuation level.
5. Select the “2TR-D2 to
Stereo Bus” option with
the CURSOR buttons and
press the [ENTER] button
to ENABLE.
Rotate the encoder
wheel to change the
attenuation level.
DIGITAL
I/O