Yamaha 02R, Owner'S Manual

Page: 260 / 354

150 Groups and Pairs
Digital Recording Console 02R User’s Guide
Pairing Channels
Adjacent channels can be paired for stereo operation. This makes it easy to
work with stereo signals, because you only have to adjust one channel to
control both left and right signals. The 02R allows you to link the input
channels – MIC/LINE 1 through 16 – the tape return channels – TAPE 1
through 16 – and the auxiliary send channels AUX 1 through AUX 6.
Channel Pair Display Screen
Shown below is the first PAIR display function - the channel Pair screen.
You can pair the input channels – MIC/LINE 1 through 16 – and the tape
returns – TAPE 1 through 16:
Use the CURSOR buttons to select a channel pair and press the [ENTER]
button to pair or separate them.
Another method of pairing channels is to press and hold the [SEL] button
of the first channel and then press the [SEL] button for the adjacent channel.
The 02R will request you confirm the operation as shown below:
Note: When you create a channel pair, all the parameters from the odd channel
are copied to the even channel, overwriting the existing even channel settings.
1. Press the [PAIR] button.
The PAIR display function
appears.
There are two screens in
this function. You may
have to press the [PAIR]
button again to get to
the “Pair” screen.
2. Use the CURSOR buttons
to select a pair of
adjacent channels and
press the [ENTER] button
to pair them.
1. Press the [PAIR] button
again to select the “Aux
Pair” screen.
2. Select a pair of adjacent
auxiliary channels and
press the [ENTER] button
to pair them.
PAIR