184
Groups and Pairs
02R User’s Guide
Pairing Channels
Adjacent channels can be paired for stereo operation. This makes it easy to
work with stereo signals, because you only have to adjust one channel to
control both left and right signals. The 02R allows you to pair MIC/LINE
channels, TAPE channels, aux sends, or bus outs.
There are two pages to the PAIR function. The first page, shown below,
contains pair hearts for TAPE channels 1 to 16 and MIC/LINE channels 1 to
16.
The following functions are linked when TAPE or MIC/LINE channels are
paired:
•
Faders and encoders
•
Aux 1–8 send levels
•
Aux 1–8 on/off
•
Aux 1–8 pre/post
•
Delay on/off
•
Delay parameters
•
EQ parameters
•
Dynamics parameters
•
Fader group and mute group
•
Fade time
•
Recall safe
•
Solo on/off
•
Surround CSR and subwoofer
1.
Use the [PAIR] button to
locate the PAIR 1/2
page.
2.
Use the CURSOR buttons
to select a pair of
channels, and press the
[ENTER] button to
activate the pair.
1.
Press the [PAIR] button
again to select the PAIR
2/2 page.
2.
Select a pair of aux
sends or bus outs, and
press the [ENTER] button
to activate the pair.
PAIR
