Yamaha 01x Owner'S Manual Download

Page: 77 / 156

01X Owner’s Manual

Recording/Playback/Remote Control

Before Using

Basics Section

Appendix

Getting Started

Reference

Audio parts — Sample Editor window

You can also call up the Sample Editor window for audio

parts in the same way. Use the cursor buttons as described

above to select the desired audio part, then press the

[EDIT] button to call up the Sample Editor.

• Although all transport controls function normally, no actual wave edit-

ing can be done from the 01X panel. Also, keep in mind that the

[SCRUB] button is not implemented for Cubase SX remote control.

Automation

Continuous automation — using Auto Read/
Write

This is one of the most powerful of the control surface fea-

tures of the 01X. Not only does it let you automate your

sequencer mixes in coordination with the 01X, all physical

fader moves are completely automated as well, moving

along with the song playback.

The following is a brief explanantion on how to use the

01X to record and play back volume automation on a spe-

cific track. Except where indicated, all control/button ref-

erences are to the 01X panel.

What parameters can I automate?

• All automation parameters available for a track are directly controlla-

ble from the 01X. In Cubase SX, click the small [+] button (Show/

Hide Automation) at the bottom left of the track to display the automa-

tion track(s). Then click on the arrow button next to the current

parameter (at top right) to show available parameters. Then click on

“More...” from the menu to display the Add Parameter list. You can

control any and all of these track parameters from the 01X!

Summary of Contents for 01x





























































































































































Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands

Yamaha 01x, Owner'S Manual

Search results

Summary of Contents for 01x

Reviews:

Related manuals for 01x

Brands by name

Popular brands