manualshive.com logo in svg

Yamaha 01V96i, Reference Manual

The Yamaha 01V96i is a versatile digital mixing console designed for professional audio applications. With its intuitive interface and advanced features, this compact powerhouse is perfect for live events or recording studios. Get started quickly with the free Quick Start Manual available for download at our website.

Share
Download
background image

76

Libraries

01V96i—Reference Manual

Output Patch Library

The Output Patch library enables you to store and recall all 
Output Patch settings. The library contains one preset mem-
ory and 32 user (readable & writable) memories.
To access the Output Patch library, press the DISPLAY 
ACCESS [PATCH] button repeatedly until the Patch | Out 
LIB page appears.
For details on storing and recalling memories, see “General 
Library Operation” on page 74.

The Output Patch preset memory #0 contains the following 
settings:

Effects Library

The Effects library enables you to store and recall Effects pro-
cessor 1–4 programs. The library contains 56 preset programs 
(including Add-On Effects) and 72 user (readable & writable) 
programs.

To store and recall settings to and from the library, you must 
locate the corresponding Effects processor’s page.
To access the Effects library, press the DISPLAY ACCESS 
[EFFECT] button repeatedly until the library page for the 
desired Effects processor appears. 
Each Effects processor features the library pages listed below:

•

Internal Effects Processor 1 Library

... FX1 Lib page

•

Internal Effects Processor 2 Library

... FX2 Lib page

•

Internal Effects Processor 3 Library

... FX3 Lib page

•

Internal Effects Processor 4 Library

... FX4 Lib page

1

EFFECT NAME

This parameter displays the name of the Effects program 
currently selected by the Effects processor.

2

TYPE

This parameter displays the effects type currently used by 
the Effects processor. The number of input and output 
channels for the currently-used effects appears below the 
TYPE parameter.

3

Move the cursor to this button, then press [ENTER] to 
display the Effect | FX1 Edit, FX2 Edit, FX3 Edit, or FX4 
Edit page to adjust the Effects parameters.

4

Move the cursor to this button, then press [ENTER] to 
display the In Patch | Effect page to assign the input and 
output signals of Effects processors 1–4.

5

Level meters

These meters indicate the input or output levels of the 
currently-selected Effects processor. Select the IN button 
or OUT button to display the input levels or output levels 
respectively.

Slot output channels 1–8

Bus Outs 1–8

Slot output channels 9–16

Bus Outs 1–8

ADAT OUT channels 1–8

Bus Outs 1–8

OMNI OUT connectors 1–4

Aux Outs 1–4

Note: 

The Effects library is shared by Effects processors 1–4. How-

ever, only Effects processors 1 and 2 enable the recall of Effect 19 
“HQ Pitch” and Effect 42 “Freeze.”

124

3

5

Summary of Contents for 01V96i



























































































































































































Reviews:

No comments

Related manuals for 01V96i

Bamix classic Quick Reference Manual preview
classic
Brand: Bamix Pages: 96
KYOWA KW-4510 Instruction Manual preview
KW-4510
Brand: KYOWA Pages: 4
Omcan MX-IT-0080-M Instruction Manual preview
MX-IT-0080-M
Brand: Omcan Pages: 40
Phonic MM1002 (Japanese) User Manual preview
MM1002
Brand: Phonic Pages: 19
Hamilton Beach Hand/Stand Mixer Owner'S Manual preview
Hand/Stand Mixer
Brand: Hamilton Beach Pages: 20
Behringer Xenyx 1222FX User Manual preview
Xenyx 1222FX
Brand: Behringer Pages: 11
Fender Pugilist Distortion Manual preview
Pugilist Distortion
Brand: Fender Pages: 8
DOEPFER ark time Owner'S Manual preview
ark time
Brand: DOEPFER Pages: 21
BYOC Large Beaver Triangle Instructions Manual preview
Large Beaver Triangle
Brand: BYOC Pages: 23
Scarlett SC-HM40S11 Instruction Manual preview
SC-HM40S11
Brand: Scarlett Pages: 16
Racing RACBTE800-UK Instruction Manual preview
RACBTE800-UK
Brand: Racing Pages: 23
Electrolux Dito 603256 Brochure & Specs preview
Dito 603256
Brand: Electrolux Pages: 4
Electrolux Dito 603289 Brochure & Specs preview
Dito 603289
Brand: Electrolux Pages: 4
Electrolux Dito 603529 Brochure & Specs preview
Dito 603529
Brand: Electrolux Pages: 4
Electrolux DITO B3000 450 W Brochure & Specs preview
DITO B3000 450 W
Brand: Electrolux Pages: 4
Russell Hobbs MX3100BKR Instructions Manual preview
MX3100BKR
Brand: Russell Hobbs Pages: 16
Eclectro-Harmonix Bass9 Manual preview
Bass9
Brand: Eclectro-Harmonix Pages: 6
Telefunken TF-MSM2.102 Instruction Manual preview
TF-MSM2.102
Brand: Telefunken Pages: 18

Brands by name

Popular brands

Load more brands