Maintenance Procedures Every 8 Hours or Daily
How to Make Checks With the Engine
Stopped
WARNING
Do not operate a lift truck that needs repairs. Report
the need for repairs immediately. If repair is necessary,
put a DO NOT OPERATE tag in the operator's area. If
lift truck is equipped with a key switch, remove the key.
Put the lift truck on a level surface. Lower the carriage and
forks, stop the engine, and apply the parking brake. Open
the hood and check for leaks and conditions that are not
normal. Clean any oil or fuel spills. Ensure all surfaces are
free of oils, lubricants, fuel and organic dust or fibers
(paper, wood, cotton, agricultural grass/grain, etc.).
Tires and Wheels
Check the tires for damage (see
). Check the
tread and remove any objects that will cause damage.
Check for bent or damaged rims. Check for loose or miss-
ing hardware. Remove any wire, strapping, or other mate-
rial that is wrapped around the axle.
Maintenance
141
Summary of Contents for VERACITOR GCC030VX
Page 24: ...Figure 6 Display Switch Cluster Right Side Display Inputs Model Description 22...
Page 40: ...Figure 8 Operator Controls Sheet 2 of 2 Model Description 38...
Page 83: ...Figure 13 Seat Adjustment Full Suspension Operating Procedures 81...
Page 172: ...Figure 43 LPG Tank and Bracket Maintenance 170...
