®
Yale iM1 Network Module
Installation and Programming Instructions
Installing the Yale iM1 Network Module
To Enroll the Module:
• Enter the 4-8 digit Master PIN code followed by the key.
The Yale iM1 Network Module must be used with a Yale Assure Lock or Yale nexTouch Lock and
cannot be used in conjunction with any other Yale Network Module.
• Press the key followed by the key.
• Press the key followed by the key.
Enrolling the iM1 Network Module:
• Remove battery cover and batteries.
IMPORTANT: Batteries must be removed prior to
removing and/or inserting the network module:
• Remove and/or insert Network Module.
• Reinstall batteries and battery cover.
P/N AYR-202-iM1-INSTAL-FUL Rev E
®
®
®
®
®
2. Ensure Bluetooth is enabled on your iPhone , iPad or iPod touch , and that you're within a
foot of your Yale lock.
1. After following steps listed on other side of page for enrolling module, download the Yale Secure
®
app from App Store .
3. Open the Yale Secure app and agree to allow app to access your Home Data.
4. If you do not have a home already created, create a new home when prompted. Tap + to add a
new Yale Lock.
5. The App will search for your Yale Lock. Be sure that you are within close proximity (less than
two feet or so). When "Yale Lock" appears, tap to add.
*If lock does not appear, enter your Master Pin Code on lock keypad, tap gear, tap 7, tap gear,
tap 1 and then tap gear.
6. Scan your Accessory Setup Code; shown below, or manually enter within the app.
Connecting the Yale Secure App with the Yale iM1 Network Module
Accessory Setup Code