Wirefree Yale ENA-PIR
Passive infrared motion
detector
Features:
1. Test/Learn Button
To enter Test mode: Press once in Standby mode.
The LED will light up for two seconds whenever a
movement is detected.
2. Red LED Indicator
3. Knockouts for Wall / Corner Mounting
4. Supervision Enable / Disable Jumper
5. Movement High/Low Sensitivity jumper
6. Tamper Switch with spring
7. 3x 1.5V AA Alkaline Battery
8. Tilt Switch
(protect against unauthorized EIR
removal, sabotage, or loose installation)
9. Top & Bottom Cover securing screw hole
Pack content:
1 x PIR
4 x Screws
4 x Wall Plugs
Supervision Enable/Disable Jumper
After installation, the PIR will automatically transmit
Supervisory signals periodically to the Control Panel
at random intervals of less than 20 minutes. If the
Control Panel has not received the signal from the
PIR for the preset period of time, the Control Panel
will indicate on its display that the particular PIR is
experiencing an out-of-signal problem.
Jumper On= Supervision Disabled
Jumper Off= Supervision Enabled (Default)
Movement High/Low Sensitivity Jumper
Jumper On= Increase PIR sensitivity to movement
Jumper Off= Decrease sensitivity (Factory Default)
SmartHome Alarm series
2
1
3
7
8
4
5
6
9