Table 7. Proc_Cal_005: Lower Valve Output Threshold (Continued)
Information:
Leave truck running at idle after performing Proc_Cal_002.
Action 1:
Activate Lift Control to Position Attachment 0.6 m (2 ft) up
with no load on the forks/attachment. If the forks/attachment are/is
not installed, ensure that the attachment will lower when the control
is activated. It may be necessary to apply a load (approximately
90 kg (200 lb) to the attachment.
You Will See:
Main Menu
Passwords
Step 1: Press
or
Until You See:
Main Menu
Calibrations
Step 2: Press
*
One Time
You Will See:
Calibrations
Lift Valve Output
Step 3: Press
or
Until You See:
Calibrations
Lower Valve Output
Step 4: Press
*
One Time
You Will See:
Lower Valve Output
Press
*
at Creep
A.
E-HYD CONTROL LEVERS
1.
LIFT/LOWER
DIRECTION LIFT ↓
DIRECTION
LOWER ↑
2.TILT
DIRECTION BACK
↓
DIRECTION FWD
↑
3.
*AUX 1 OR AUX
2
DIRECTION A ↑
DIRECTION B ↓
4.
*AUX 2 OR AUX
3
DIRECTION A ↑
DIRECTION B ↓
5.
*FOURTH
LEVER
6.
*THIRD LEVER
7.
SEAT ARMREST
*AUX 2 IS IN THE FOURTH LEVER LOCATION EXCEPT AS FOLLOWS: WITH 5 FUNCTION VALVE WITH CLAMPING ATTACHMENT,
AUX 2 IS IN THE THIRD LEVER LOCATION.
2.
JOYSTICK
1.
TILT BACK
2.
AUX 1
DIRECTION A ↑
DIRECTION B ↓
3.
LIFT ↓
4.
↑ LOWER
5.
AUX 2
DIRECTION A ↑
DIRECTION B ↓
6.
TILT FORWARD
7.
SEAT ARMREST
Proc_Cal_005: Lower Valve Output Threshold
8000 YRM 1134
14
Confidential/Proprietary - Do Not Copy or Duplicate
