3/16”
#7
1/4-20
for Wood drill 7/32
Machine Screws
#7 Drill, 1/4-20 Tap
Sleeve Nut and Bolt
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other side
Drill 9/32 thru from Closer Side
3/8 Drill other Side
(Optional)
Metal
Wood
Installation Instructions
80-9303-2206-010 (10-07)
Non Hold Open Models
Sized
(Sizes 2,3,4,5,6)
3100
3300
3500
Adjustable
(Sizes 1 thru 6)
3301
3501
Tri-Style
3000 Series
NOTE:
For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Always adjust spring power before
adjusting control.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°. Greater closing
times may be required for elderly or
handicapped.
These door closers should NOT be installed on the exposed side (weather side) of exterior doors.
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Regular Arm
Installation
See Page 2
Parallel Arm
Installation
See Pages
3 & 4
Parallel Arm
Installation
See Pages
3 & 4
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
Non Handed Door Closer
"DL” suffix (Delayed Action) is an optional
feature.
CAUTION
CAUTION
An Incorrectly installed or
improperly adjusted door closer can
cause property damage or personal
injury. These installation instructions
should be followed to avoid the
possibility of misapplication or
misadjustment.
!
Optional 3500MA Series
Architectural Metal Cover
Cover Screw
Cover Screws
Standoffs
Screw Pack
Optional 3500A Series
Architectural Plastic Cover
Insert Cutouts
Cover
Insert
Standoff
Standoff
Cover Clips
Cover Screw
Cover Screws
Optional 3500M
Series Metal Cover
Backcheck Valve
Power Adjustment Shaft
Latch Valve
Sweep Valve
Closer Body
Regular Arm/Top
Jamb Shoe
Connecting Rod
Forearm
Screw
Main Arm
Closer Arm
289A Parallel
Arm Bracket
Cover
Insert
Standard 3500P Series
Full Cover
Insert Cutouts
NOTE:
Architectural Cover
CAN NOT be used for doors
swinging over 120 using
parallel mount
°
Standard 3300 Series Narrow Cover
Pinion Cap (1639)
3400A
Cover
3400P
Cover
3400MA
Cover
3400M
Cover
* Pilot Hole
Required
3200P
Cover
Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
